With the SLUG 96 technology, it’s not possible to close the active half of the door if the lever bolt is unlocked. This is unlike a standard manual lever bolt that can be left open, which compromises the fire protection.
The holder of the key can select locking and controlling permissions and prevent unintentional use of the passive door leaf.
The lever bolt applies the same push-to-close cylinder technology as all SLUG locks, with a visual indication of whether the lock is locked or unlocked. Locking is easily done by bringing the cylinder up or down, depending on the position, until the rod is inserted into its hole in the frame, floor, or threshold. In that position, the cylinder is pushed until it locks.
SLUG 96 can be mounted in most wooden and metal doors. Recesses, other measurements, and instructions can be found below, under downloads.
The size of the lever bolt corresponds to the standard type 96 lever bolt that is available in several designs. An exchange between the standard 96 and the SLUG 96 is possible as long as the recess for the SLUG 96 is taken into account and that there is space in the door for the movement of the cylinder housing.
The lock cylinder is not included. Scandinavian oval lock cylinder with a height of 31 mm fits.
Self-drilling screws for installation in steel or wooden doors are included.
You're not logged in
In order to order products from ROCA you have to log in with your username/email and password.
If you are a company and are interested to place an order, but don't have a ROCA account, please contact us.